Busy Lockout –
Busy Channel
22
Lock-out
Key Auto Lock
–Automatic
23
Keypad Lock
Direction –
Frequency Offset
24
Direction
Offset -Frequency
shift
25
amount
Memory - Store a
26
Memory Channel
Delete - Delete a
27
memory channel
MENU+22
MENU+23
MENU+24
MENU+25
MENU+26
MENU+27
37
OFF
ON
*Disables the [PTT] button on a channel that is
already in use. The transceiver will sound a beep
tone and will not transmit if the [PTT] button is
pressed when a channel is already in use.
OFF
ON
*When ON, the keypad will be locked if not used in
8 seconds. Pressing the [* ] key for 2 seconds will
unlock the keypad.
None: TX = RX (simplex)
Plus: TX will be shifted higher in frequency than RX
Minus : TX will be shifted lower in frequency than RX
00.000...69.990
*Specifies the difference between the TX and RX
frequencies
000...127
*This menu is used to either create new or modify
existing channels (0 through 127) so that they can
be accessed from
MR/Channel Mode
000...127
*This menu is used to delete the programmed
information from the specified channel (0 through
127) so that it can either be programmed again or
be left empty.