Func�Ons And Opera�Ons - Baofeng BF-H6 Series User Manual

e. And just as in the previous section;
a). To confirm your selection, press [MENU] and it will save your setting and bring you back to the main menu.
b). To cancel your changes, press [BACK] and it will reset that menu item and bring you out of the menu entirely.
f. To exit out of the menu at any time, press the [BACK] key.
g. All further examples and procedures in this manual will use the numerical menu short- cuts.
7.3 Functions and operations
(1) Squelch level (Squelch) - MENU No.0
Thanks to this function you can adjust the squelch in 10 different levels:
• Level 0: opened squelch. With this setting, H6 will detect all signals, also the weakest ones, but will also receive the
background noise or undesired signals.
• Levels 1- 9: level 1 (lowest squelch level), level 9 (highest squelch level).
If the squelch is set to the highest level, the radio will receive the strongest signals only.
(2) Step frequency (Step) - MENU No.1
This function lets you select the desired frequency step.
The selectable steps are the following: 2.5/5.0/6.25/10.0/12.5/20.0/25.0/50.0 KHz
Note: in channel mode, this function cannot be modified.
(3) Transmit power (Tx Power) - MENU No.2
In this MENU you can select the high/middle/ low output power.
High power =8W(VHF max)/7W(UHF max);Middle power=5W; Low power =2W
Note: select the output power can improve the quality of the call, while the low output power can reduce the radiation
and the battery capacity loss. Press the fast key "#" to switch between the high or low output powers.
(4) Power save (Power save) - MENU No.3
The power save feature enables a reduction in the consumption of the battery when the radio is in standby.
23