Baofeng BF-H6 Series User Manual page 41

Alarm Mode -
28
Alarm Mode
Scan CTCSS -Scan
of frequencies
29
with CTCSS
Scan DCS -Scan of
frequencies with
30
DCS
STE - Squelch Tail
31
Elimination
RP-STE-Squelch
32
Tail Elimination
RPT-RL - Delay the
squelch tail of
33
repeater
ROGER - Roger
34
Beep
MENU+28
MENU+29
MENU+30
MENU+31
MENU+32
MENU+33
MENU+34
38
On site: Sounds alarm through your radio speaker
only
Send sound: Sending alarm tone
Send code: Sending alarm code
67.0HZ,...,254.1HZ
*Automatic stop after receiving the CTCSS signal
D023N,...,D754I
*Automatic stop after receiving the DCS signal
ON
*This function is used eliminate squelch tail noise
between POFUNG handhelds that are
communicating directly (no repeater). Reception of
a 55 Hz or 134.4 Hz tone burst mutes the audio long
enough to prevent hearing any squelch tail noise.
OFF/ 1,2,3...10
*This function is used eliminate squelch tail noise
when communicating through a repeater.
OFF/ 1,2,3...10
*Delay the Tail Tone of Repeater (X100 milliseconds)
OFF
*Sends an end-of-transmission tone to indicate to
other stations that the transmission has ended.
OFF
ON