Programming Notes; Programming Guide - Baofeng DM-V1 Programming Manual

PREFACE
Thank you very much for choosing our BAOFENG Dual Band Digital DMR and Analog two way radio.
This radio adopts the latest advances in technology, providing reliable communication in today's
demanding communication environment.
This radio offers both DMR digital and analog communication, introduces innovative DMR digital
processing system to achieve SMS, high-audio quality and digital encryption. It offers great stability, and
reliability, together with long distance communication as well as fashionable design and compact exterior
lines. This radio has Text Messaging, Voice Message, Digital Encryption, Emergency Alarm, Analog DTMF;
CTCSS/CDCSS encode/decode functions.

PROGRAMMING NOTES

When programming the radio, start by reading the factory software data, and then rewrite this data with
your frequency etc., to a new saved code plug, otherwise errors may occur.
You can use the programming cable with a PC to program the frequency, channel type, power etc. you
programming must comply with your FCC (or other country) license certification.
European Users should note that operation of this unit in Transmit mode requires the operator to have a
valid Amateur Radio License from their respective Countries Amateur Radio Licensing Authority for the
Frequencies and Transmitter Power levels that this Radio transmits on. Failure to comply may be unlawful
and liable for prosecution. At this subject, refer to the "EU" specification guide 2014/53/EU.

PROGRAMMING GUIDE

The programming software and code plug programming guide are available for download from BAOFENG
website:
https://www.baofengradio.com
When programming this radio for the first time, it is recommended you first READ the radio with the
software and then save this file for future reference as it contains the default programming and settings.
In addition, after you READ this radio with software, first make you programming and frequency changes,
and then write the edited file to your radio.
You will need the programming cable to connect your radio to your computer for programming.
To perform a firmware upgrade, press the PTT button, then turn on the power and volume switches to
enter firmware upgrade mode.