Chapter7. Working The Menu System; Basic Use; Using Short-Cuts - Baofeng BF-H6 Series User Manual

For a complete reference on available menu items and parameters, see Appendix C, Shortcut Menu operations.
Note: in channel mode, the setting of these features is not possible: CTCSS/ DCS tones, wide/narrow bandwidth, PTT-ID,
Busy channel lock out, channel name edit.

7.1 Basic use

Using the menu with arrow keys
a. Press the [MENU] key to enter the menu.
b. Use the ▲/▼ keys to navigate between menu items.
c. Once you find the desired menu item, press [MENU] again to select that menu item.
d. Use the ▲/▼ keys to select the desired parameter.
e. When you've selected the parameter you want to set for a given menu item;
a). To confirm your selection, press [MENU] and it will save your setting and bring you back to the main menu.
b). To cancel your changes, press [BACK] and it will reset that menu item and bring you out of the menu entirely.
f. To exit out of the menu at any time, press the [BACK] key.

7.2 Using short-cuts

As you may have noticed if you looked at Appendix C, Shortcut Menu operations, every menu item has a numerical value
associated with it. These numbers can be used for direct access of any given menu item.
The parameters also have a number associated with them, see Appendix C, Shortcut Menu operations for details.
Using the menu with short-cuts
a. Press the [MENU] key to enter the menu.
b. Use the numerical keypad to enter the number of the menu item.
c. To enter the menu item, press the [MENU] key.
d. For entering the desired parameter you have two options:
a). Use the arrow keys as we did in the previous section; or
b). Use the numerical keypad to enter the numerical short-cut code.

Chapter7. Working the MENU System

22