Baofeng BF-H6 Series User Manual page 39

DTMFST - DTMFST
16
S-CODE - Signal
17
Code
Scan Mode -
Scanner Resume
18
Method
PTT-ID - PTT-ID
19
MDF-A - Channel A
20
Display Mode
MDF-B - Channel B
21
Display Mode
MENU+16
MENU+17
MENU+18
MENU+19
MENU+20
MENU+21
36
OFF: No DTMF Side Tones are heard
DT-ST : Side Tones are heard only from manually
keyed DTMF
codes
ANI-ST: Side Tones are heard only from automatically
keyed
DTMF codes
DT+ANI : All DTMF Side Tones are heard
1,...,15
* Signal code (only could be set by PC software)
Time - scanning will resume after a fixed time has
passed
Carrier -scanning will resume after the signal
disappears
Search -scanning will not resume
OFF: No ID is sent
BOT: The selected S-CODE is sent at the beginning
EOT: The selected S-CODE is sent at the ending
BOTH : The selected S-CODE is sent at the beginning
and ending
Frequency: Displays programmed Frequency
Name: Displays the channel name
*Note: Names must be entered using software.
Frequency: Displays programmed Frequency
Name: Displays the channel name
*Note: Names must be entered using software.