Baofeng BF-H6 Series User Manual page 30

(20) PTT-ID (PTT-ID) - MENU No.19
With this function you can decide when sending the ANI-ID code in tx mode.
You can choose amongst 4 possibilities.
• OFF: press PTT to turn it off
• BOT: the code is sent when you press the PTT
• EOT: the code is sent when the PTT is released
• BOTH:
the code is sent when you press and release the PTT
Note: select 'OFF' when using in case of affecting the radio.
(21) Channel A Display Mode (MDF-A) - MENU No.20
This function is used to set the display mode of channel A.
Display modes:
• Frequency: Frequency + channel No.
• NAME:
Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(22) Channel B Display Mode (MDF-B) - MENU No.21
This function is used to set the display mode of channel B.
Display modes:
• Frequency: Frequency + channel No.
• NAME:
Channel name
Note: Channel name mode must be set by the programming software. Up to three numbers or characters can be edited.
(23) Busy Channel Lock (Busy Lockout) - MENU No. 22
When this function is on, it may prevent other radios' interference. If the selected channel is being used by other radios,
when you press key PTT, your radio cannot transmit.
Release the PTT and transmit as soon as the frequency is no longer busy.
27