Control Units In A Tlon Network; Earlier S/W Version Download - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
19.2
19.3
Operating Instructions Fire alarm system EBL512 V2.3.x
6. During the download of the S/W and/or text file, some
information will be shown in the Win512 log view and when the
download is ready, "Downloading completed successfully." will
be shown for the S/W and text file respectively. Close the dialog
box.
7. Open the "Tools" menu and open the "EBL512 settings" dialog
box. See "3" & "4" above. Click "Read". In the log view will be
shown: "System information has been uploaded".
settings, change when required. See "3" & "4" above. Click
"Download". In the log view will be shown: "System information
has been downloaded". Close the dialog box.
8. Remove jumper "JP1 (BOOT)". Do a reset/restart, see "3" above.
Regarding the reset/restart, see chapter "Restart", page 69.
Follow the same procedure in each control unit.

Control Units in a TLON network

All control units connected to a TLON network shall have the same
S/W version.
For download of new S/W in each control unit, follow the procedure
described above.
Since some control units do not have contact with some control units
during the downloading, the following faults might be generated:
"FAULT: CU xx has no contact with CU xx"
"FAULT: CU xx has wrong information"
The faults have to be acknowledged.

Earlier S/W version download

For some reason it might by required to download an earlier S/W
version. The procedure is the same as for a new S/W version but with
the following additions:
1. The Win512 version designed for the S/W version to be
downloaded, has to be used.
2. After the download, the "EBL512 settings" shall be read, edited
(if required, e.g. the no. of addresses) and then downloaded
again.
3. The dialog box "Please enter your password" displays.
4. The PC program "Key512" is used to get a "Password" for the
number specified in the "Key" field.
personnel have access to "Key512".)
5. When the password is typed, click "OK".
67
Check the
(Only authorised