Maintenance (H8); Access Code For Maintenance - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
30
30.1
Action
"Access"
Scroll to menu H8.
"A"
Enter the code (4 digits)
Rev: 1

Maintenance (H8)

Access code for maintenance

Access code for access level 3 is required for menu H8.
NOTE! If login to level 2 was made with code for level 3 or 4, no
code to access level 3 is required here.
Text in display
Maintenance
Access code: _
Access code: ∗∗∗∗
NO ACCESS!
Disable or re-enable outputs for
routing equipment
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT? H8
ACCEPT? S1
119
Comments
According to chapter
"Access", see page 72.
When required (see
above), enter the access
code for level 3.
The digits are replaced
(∗∗∗∗) in the display.
The access code was not
correct. Try again.
The access code was
correct. This is menu S1.
Press "A" to accept or
scroll to the following
menus (S2-S8).