Activate Address Setting Mode For Du (H5/A9) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
27.10
Action
"Access"
Scroll to menu A9
"A"
"A"
Rev: 1
Activate address setting mode for DU
(H5/A9)
This function can be used by commissioning / service engineer to
activate the address setting mode in the following Display Units
connected to an Ext. FBP / DU interface board 1587 in the c.i.e.:
• Ext. Presentation unit 1728
• Alert Annunciation unit 1735 / 1736
• Ext. FBP 1826 / 1828
A specific unit or all units connected to one 1587 board can be
activated for address setting.
NOTE! The units have to be in operation and in quiescent condition,
i.e. the units have to have an address already.
Text in display
Activate address setting mode for DU
Activate address setting mode for DU
CU 00, 1587-board 0, DU 00
Activate address setting mode for DU
The address is thereafter edited in the unit respectively.
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT? A9
ACCEPT?
ACCEPT? A9
113
Comments
According to chapter
"Access code for service
(H5)", see page 104.
Write control unit number,
the board number (0-1)
and the unit's address (99 =
All units on the selected
1587-board). Press "A" to
accept.
Scroll or press "Return" to
H5. Scroll or press
"Return" to log off.