Panasonic EBL512 Operating Instructions Manual page 38

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
14.2.1.1
14.2.1.2
14.2.1.3
14.2.1.4
Operating Instructions Fire alarm system EBL512 V2.3.x
The original presentation (the user definable text message) will be
automatically displayed again, 20 seconds after the latest time any of
the push buttons "A", " ", " ", " ", " " and "Return" was used.
Scroll (" ", " ") to the wanted menu and press "A".
Display alarms (X1)
ZONE: 123
Display alarms
First row: Explanations in chapter "Fire alarm", page 34.
Second row: All fire alarms, also several alarm points in one zone,
will be displayed in zone - address order (i.e. up to 15360 alarms).
Press "A". E.g.:
ZONE: 123
Point: 123-45
Point: Zone-address for alarm no. 00001.
" "
ZONE: 123
Point: 234
Point: Zone no. for alarm no. 00002.
...and so on.
Display faults (X2)
ZONE: 123
Display faults
Press "A". E.g.:
ZONE: 123
FAULT: Battery not connected CU xx
Only the fault message, for the fault respectively, is displayed here,
not date, time and "status" information.
Display disablements (X3)
ZONE: 123
Display disablements
Press "A". E.g.:
ZONE: 123
Zone XXX address XX disabled
Disable zone (X4)
ZONE: 123
Disable zone
Press "A". E.g.:
36
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
00001 of 00005
LAST: 789 No.: 003
00002 of 00005
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
LAST: 789 No.: 003
ACCEPT?
X1
X2
X3
X4