Fire Alarm Menu (X1-X7) - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748 Rev: 1
14.2.1
Operating Instructions Fire alarm system EBL512 V2.3.x
Only one alarm point in each zone
POINT: 123-45
User definable text message for 123-45
LAST = The most recent zone-address that has activated fire alarm.
No. = The total number of zones
User definable text message For an alarm point it is the individual
(free) text for the alarm point (if programmed) or the default control
unit text (if programmed).
User definable text message For a zone it is the individual (free) text
for the zone (if programmed) or the text "Many alarms in zone".
LEDs "Alarms queued" (L2) blinking (0.4 / 0.4 sec.). More than
one fire alarm is activated.
button "Scroll" (P1). The fire alarms are stored in a circular buffer
and when scrolling from the last to the first alarm, the LEDs "Alarms
queued" will be turned off for three seconds.
The first alarm will be automatically displayed again, 20 seconds
after the latest time the "Scroll" button was used.
The printer will print each fire alarm
*** Fire Alarm ***
Point: 123-45
User programmable text message (if progr.)
or
Zone: 123
User programmable text message (if progr.)
Reset of the fire alarms, see chapter "Alarm reset", page 41.

Fire alarm menu (X1-X7)

During the fire alarm presentation, a special fire alarm menu can be
42
used. (If this menu is excluded, via Win512, it is a violation to the
EN54-2 standard).
Press "Access" and the user definable text message will be replaced:
ZONE: 123
Display alarms
"A", " ", " ", " ", " " and "Return" are used like in the normal
menu tree, see chapter "Access", page 72.
38
In Chinese convention, the total number of alarm points.
39
Up to 512 alarms can be presented in the display. Alarm = ZONE and/or
ZONE-ADDRESS (depending on zone or point alarm presentation) but all
possible alarms (15360) can be stored.
40
In Chinese convention after 3 minutes.
41
When printer is available (e.g. control unit 1549). The alarms will be
printed like they are presented in the display, i.e. as point alarms or zone
alarms.
42
Not valid in Chinese convention.
35
LAST: 789-01
38
where fire alarm is activated.
39
To scroll through the zones, use the push
41
, e.g.:
Time HH.MM
Time HH.MM
LAST: 789
ACCEPT?
No.:003
40
Date MM-DD
Date MM-DD
No.:003
X1