Table of Contents
Advertisement
Save to Bank Automatically
Choose bank first and then drag the signal to display. Chose another bank, previous bank can be automatically
saved.
Layer numbers
Numbers in the corner is to show how many layers at present allowed to put in the output.
Layer Adjustment
there are two ways to adjust layer.
1. Use the bar under the interface
Choose one layer and the bar shows its signal source, type in position and size.
2. Layer Scale
this icon means data related, when width is
changed, height will be changed as same proportion.
this icon means data not related, width and
height need to be filled repectively.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com
26 / 34
Advertisement
Table of Contents
