System Setting; Find Device; Keyboard Manager - RGBlink Q16 Quick Start Manual

System Setting

Find Device

New version of XPOSE 2.0 is blank default in Find Device. Users are supposed to choose the device needed in
System Setting.
Then click icon
make sure physical connection of Q16 and XPOSE 2.0 is done, either by connecting Q16 to the PC which run
XPOSE 2.0, or connect Q16 to router which offer same network as the PC in.
System Info: show the current software version
Language:Chinese, English and Russian
Communication Setting: Search or Direct, Search default.
Serial port, Ethernet Communication, Both are Choose. Both are Chosen default.
Layer Management:Auto Cut On or Off
Prompt Message: Warning or Notice will show in yellow when Unlock Prompt and Guide Prompt are on.
Expanding Mode: If there is expanded display connected, turn on expanding mode, XPOSE interface will show
on the display.

Keyboard Manager

click keyboard
redirected to keyboard setting window.
Keyboard setting is designed to fit for different
operation systQ16 such as Windows and Mac. Users
can set short
Drag Input, Output, Layer and Preset from the list to
the keys you desired as follow:
Input, Output, Layer.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
and enter the interface, choose the device Q16 in Find Device. Before system setting
support@rgblink.com
it will
| www.rgblink.com
12 / 34