Omron NJ Series Network Connection Manual page 52

SYNCFLG: Measurement synchronization completion bit: Turns ON when
READY: Ready bit: Turns ON when the displacement sensor can execute
RUN: Run screen bit: Turns ON when the displacement sensor is in the
BANK1_A to E (BANKOUT1_A to E): Current bank number bit: Outputs the
ERR: Error bit: Turns ON when a displacement sensor error is detected.
Allocation of EIPInput.CommonStatusFlag.W variable
Offset (word) 15 14
15 14
+0
31 30
+1
Bits 31 to 0: EIPInput.CommonStatusFlag.W uses DWORD data from offset
*5: Details on allocation of sensor head 1 status signal
Allocation of EIPOutput.SensorHead1StatusFlag.F variable
Offset
15 14 13
(word)
+2
LOW1 PASS1 HIGH1
+3
_T1 _T1 _T1
HOLDSTAT1: Hold execution status bit: Turns ON when the displacement
RESETSTAT1: Reset execution state bit: Turns ON when the displacement
LIGHT1: Logical beam lighting state bit: Turns ON when the logical beam is lit.
STABILITY1: Measurement position bit: Turns ON when the measured value is
ENABLE1: Measurement state bit: Turns ON when the displacement sensor is
GATE1: Data output completed bit: Turns ON when the displacement sensor
OR1: Overall judgment result bit: Turns ON when even one of the judgment
ZEROSTAT1_T1 to 4: Zero reset bit: Turns ON when the displacement sensor
9. Appendix 1 Detailed Settings of the Tag Data Links
the displacement sensor executes measurement synchronization
processing and the state changes to one where normal measured
values can be output.
control commands or measurement synchronization processing.
RUN mode.
currently specified bank number. It expresses the bank number in
combinations of BANKOUTx_A to E.
13
13
29
+ 2 words.
12 11 10 9 8
LOW1 PASS1 HIGH1 LOW1 PASS1
_T1 _T1 _T1 _T1 _T1
sensor is in the hold sampling period.
sensor is in the reset execution state.
in the measuring range.
ready for measurement.
completes control data output when hold is set.
result of the displacement sensor TASK1 to 4 is other than
PASS.
TASK1 to 4 is in the zero reset execution state.
...
...
...
7 6 5 4 3
GATE ENABLE STABLIT
OR1
1 1 Y1
HIGH1 LOW1 PASS1 HIGH1_ LOW1_T
_T1 _T1 _T1 T1 1
2 1 0
2 1 0
18 17 16
2 1 0
RESET HOLD
LIGHT1
STAT1 STAT1
PASS1_ HIGH1_ LOW1_T
T1 T1 1
49