Omron NJ Series Network Connection Manual page 30

4
OMRON_ZW_EIP_EV100
project is displayed.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
*If an error message is
displayed stating "Failed to
Load Descendants", change
the version of the Sysmac
Studio to the version specified
in 5.2. Device Configuration or
higher version.
5
Select Check All Programs
from the Project Menu.
6
The Build Tab Page is displayed
in the Edit Pane.
Confirm that "0 Errors" and "0
Warnings" are displayed.
7
Select Rebuild Controller from
the Project Menu.
8
Confirm that "0 Errors" and "0
Warnings" are displayed in the
Build Tab Page.
7. Connection Procedure
Multiview Edit Pane
Explorer
Toolbox
27