5
The Communications Setup
Dialog Box is displayed.
Select the Direct Connection via
USB Option for Connection
Type.
Click the OK Button.
6
Select Online from the
Controller Menu.
*If the dialog on the right is
displayed, the model or version
of the Controller does not
match that of the project file.
Check the settings of the
project file, repeat from step 1.
Click the OK Button to close
the dialog box.
*The model and version
displayed on the confirmation
dialog box differ depending on
the Controller used and the
device setting of the project file.
Additional Information
Refer to Section 5 Online Connections to a Controller in the Sysmac Studio Version 1
Operation Manual (Cat. No. W504) for details on online connections to a Controller.
7. Connection Procedure
29