Table of Contents
Advertisement
118
C H A P T E R T H I R T E E N
2
Turn your computer on and start Windows
NOTE: Under Windows
below.
A) If you see the above screen, select the third option "Do not
install a driver [Windows will not prompt you again]".
B) If you see the "Update Device Driver Wizard" during start
up, follow the instructions from the installer, click Next,
then Finish when it appears on the screen.
3
Insert the CD-ROM into your CD-ROM Drive. Windows
3.1/3.11/95/98/NT4.0 will be detected automatically, and if possible
the Auto-Installer will run automatically. If the Auto-Installer does
not run after a few seconds, you can run it by:-
• Win 3.1/3.11
A) Choose Run from the File menu in Program manager.
B) Type X:\SETUP.EXE" [where X is your CD-ROM Drive] in
the command line box.
C) Click on OK.
• Win 95/98/NT4.0
A) Click the START button and then select RUN from the
Start Menu.
B) Type X:\SETUP.EXE" [where X is your CD-ROM Drive] in
the command line box.
C) Click on OK.
YOU CAN EXIT FROM THE AUTO-INSTALLER AT ANYTIME BY
CLICKING ON THE ICON IN THE BOTTOM RIGHT HAND
CORNER OF YOUR SCREEN.
®
®
95 the following screen might appear, as shown
.
®
Advertisement
Table of Contents
