Brother MFC-9550 Owner's Manual page 28

A “3 in 1” model: fax, printer, copier
Hide thumbs Also See for MFC-9550:
Table of Contents

Advertisement

IMPORTANT:
If you need to remove the moulded mains plug in order to
fit an appropriate type, you must discard the moulded plug
immediately having cut it off, in order that it is not
inadvertently inserted into a live socket, thus presenting a
shock hazard. The wires in the mains lead of this
appliance are coloured in accordance with the following
code.
Green-and-yellow : Earth
Blue
Brown
As the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be
connected to the terminal in the plug which is marked by
the letter "E" or by the safety earth symbol
green or green-and-yellow.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter "N" or coloured
black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter "L" or coloured
red.
The PC interface is a SELV (Safety Extra Low Voltage) port
as defined in EN41003. It must only be connected with a
SELV circuit; only the MFL Pro for Fax cable kit (available
in an option pack), satisfies this requirement.
NOTICE:
This machine must be fitted with an earthed plug.
Since the machine is earthed via the mains plug, you can protect
yourself from potentially hazardous electrical conditions on the
telephone network by keeping the power to your machine on when
you connect it to a telephone line. Similarly, you can protect yourself
when you want to move your machine, by disconnecting the
telephone line first, and then the power cord.
Do not touch the rollers at the paper exit.
I N S T A L L A T I O N
: Neutral
: Live
15
or coloured

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-9050

Table of Contents