Brother MFC-9550 Owner's Manual page 156

A “3 in 1” model: fax, printer, copier
Hide thumbs Also See for MFC-9550:
Table of Contents

Advertisement

T R O U B L E S H O O T I N G A N D M A I N T E N A N C E
ERROR MESSAGE
NO RESPONSE/BUSY
NOT ASSIGNED
PRINT OVERRUN
PRINTER JAM
SET CARTRIDGE
TONER EMPTY
CHANGE TONER
CAUSE
The number you called does not
answer or is busy. Or, you may
have reached a number that is not
connected to a fax machine.
You tried to access a One
Touch or Speed Dial number
that is not programmed.
The available Ram has been
exceeded.
The recording paper is jammed Do not pull the paper out until
in the machine.
Toner cartridge is not installed. Reinstall the toner cartridge.
Toner is used up and printing is
not possible.
If the display shows CHANGE Order a new toner cartridge
TONER and at the same time now.
the Toner Empty LED on the
controlpanel flashes on and
off, you can still print. But
the toner is depleted and the
machine is telling you that
the toner will soon run out.
ACTION
Check the number and try again.
Set up the One Touch or Speed
Dial number. See chap. 7
• Press the FF/Cont to print
the data remaining in the
printer memory.
• If you have installed the
®
Windows
printer driver, try
again after setting the
TrueType mode to "Print as
Graphics" in the PRINT menu
of you application software.
• If this does not clear the error,
recuce the complexity of your
document or reduce the print
resolution.
you see next page.
Replace the toner cartridge with
a new one. (See "Replacing the
Toner Cartridge" in this chapter).
143

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-9050

Table of Contents