Table of Contents
Advertisement
Searching Telephone Index
See
You can search for names you have stored in One Touch and Speed Dial
"Storing One
memories. Names are stored alphabetically.
Touch Dial
1
Numbers"
and
"Storing
Speed Dial
2
Numbers"
3
chap. 7
4
5
Chain Dialling
You can store very long dialling sequences by dividing them and setting
them up as One Touch and Speed Dial numbers. Then while dialling, you
can combine two or more One Touch and/or Speed Dial numbers and
even include manual dialling using the dial pad. You can use these
numbers in any combination. The combined number will be dialled, in
the order you entered it, as soon as you press Start.
For example:
You store "555" on One Touch Dial key 01 and "7000" on One Touch
Dial key 02. If you press One Touch 01, 02 and Start, you can dial
"555-7000". To temporarily change a number, you can substitute part of
the number with manual dialling using the dial pad. So, if you press One
Touch 01 and press 7001 using the dial pad, you can dial "555-7001".
Using access codes is easy. Sometimes you may want to choose from the
among several long distance carriers when you make a call; rates may
vary depending upon the time and destination. To take advantage of low
rates, you can store the access codes or long-distance carriers as One
Touch and Speed Dial numbers.
T E L E P H O N E ( V O I C E ) O P E R A T I O N
Press Tel-Index, then enter the first letter of the name you're
looking for.
Press
or
to search the memory.
When the screen displays the name you want to call,
press Start to begin dialling.
Pick up the handset (and press Tel for MFC-9050) when the other
party answers. (The speaker works only one way; the other party
won't be able to hear you unless you pick up the handset.)
When the call is over, hang up.
79
Advertisement
Table of Contents
