Table of Contents
Advertisement
136
C H A P T E R S I X T E E N
11
Do not touch a document during printing.
12
Never push objects of any kind into this product through cabinet
slots, since they may touch dangerous voltage points or short out
parts resulting in a risk of fire or electric shock. Never spill liquid of
any kind on the product.
13
Do not attempt to service this product yourself, because opening or
removing covers may expose you to dangerous voltage points and/or
other risks. Refer all servicing to service personnel.
14
This product has no mains ON/OFF switch. It is therefore highly
important that access to the mains plug and the mains socket to
which the plug is connected, is never obstructed, in case for some
reason the mains power to the machine must be quickly
disconnected.
15
Unplug this product from the mains power and telephone line
sockets, and refer servicing to qualified Service Personnel under the
following conditions:
A When the power cord is damaged or frayed.
B If liquid has been spilled into the product.
C If the product has been exposed to rain or water.
D If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions. Improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to
normal operation.
E If the product has been dropped or the cabinet has been damaged.
F If the product exhibits a distinct change in performance,
indicating a need for service.
IEC 825 Specification
This machine is a Class 1 laser product as defined in IEC 825
specifications. The label shown below is attached in countries where
required.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
Advertisement
Table of Contents
