Table of Contents
Advertisement
140
C H A P T E R S I X T E E N
The connection to the BT network must not be hard-wired.
This equipment is NOT approved for connection to the following:
1 + 1 Carrier Systems;
Leased Lines;
Shared Service ("Party") Lines;
As an extension to a Payphone;
Calls to the emergency services (999) DO NOT remain enabled on
the handset in the absence of mains power.
Stored telephone numbers are retained in the absence of mains power.
The loudspeaking facility (call progress monitor) will not function unless
the unit is plugged into the mains and switched on at the power socket of
the mains switch if applicable.
This owner's manual has been provided with your machine to help you
make use of the functions provided.
This machine must not be connected in conjunction with parallel
extension telephones, unless those telephones are connected downstream
of this machine. This means that the cable to which any extension
device is connected, should be terminated on a BT modular jack plug
type 431A which in turn is inserted into the modular socket of the T-
shaped line cord connector of this machine. If these instructions are not
followed, the following conditions may occur:
1. The fax machine inadvertently auto-answers in response to outward
pulse dialling of an extension telephone.
2. Fax transmissions can be impaired or will fail entirely.
3. Remote activation from extension telephones may not work
correctly.
If in doubt about any aspect of telephone extension cabling, contact BT,
Kingston upon Hull Telecommunications, your PBX maintainer, your
CATV company or a reputable telephone cabling company.
Advertisement
Table of Contents
