Table of Contents
Advertisement
Select Paper Type
1
Press Menu, 3, 1. The screen displays
2
Press Set.
3
Press
or
to select your paper setting.
4
Press Set when the screen displays your selection.
If you use Brother coated paper, select INK JET, then select BROTHER (BP72CA). If you use
non-Brother ink jet paper, select INK JET, then select OTHER. If you did not select INK JET,
skip to Step 6. (For information on ordering Brother paper, see the page before the Table of
Contents.)
5
to select BROTHER or OTHER, and press Set.
Press
or
6
Press Stop to exit.
The MFC ejects paper with printed surfaces face up into the paper tray at the front
of the MFC. When you use transparencies, remove each sheet immediately, to
prevent a paper jam or curled sheets.
Select Copy Quality
1
Press Menu, 3, 2.
2
Press
or
to select copy quality and press Set when the screen displays your selection.
3
Press Stop to exit.
Colour Adjustment
1
Press Menu, 3, 3.
2
Press
or
to select RED, GREEN, or BLUE, and press Set.
Light
R: –
G: –
B: –
3
to adjust the degree of colour, and press Set.
Press
or
4
Return to Step 2 to select the next colour—OR—Press Stop to exit.
Copy Contrast
You can choose the contrast setting for a copy. Greater contrast can help an image look sharper and
more vivid. This feature is available only for colour copying.
1
Press Menu, 3, 4.
2
Press
to decrease contrast —OR— Press
Press Set when the screen displays your setting.
3
Press Stop to exit.
60
Chapter 9
Dark
+
+
+
1.PAPER TYPE
to increase contrast.
Advertisement
Table of Contents
