Product Overview - 3M DBI-SALA EZ-Line User Instructions

;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.
;
If you have any questions about the product or this instruction manual, please contact 3M Technical Services. The contact
information for 3M Fall Protection is provided on the back cover of this instruction manual.

PRODUCT OVERVIEW:

Figure 1 illustrates the 3M™ DBI-SALA® EZ-Line™ Horizontal Lifeline (HLL) system. The HLL System is secured between two
anchorage points and provides connections for up to two users as part of a Fall Arrest or Restraint system.
Figure 2 illustrates components of the EZ-Line Horizontal Lifeline. The Lifeline (A) extends from the Housing (B) and serves as
the body of the EZ-Line Horizontal Lifeline. Carabiners (D) on either end of the device secure the Horizontal Lifeline between two
anchorage connection points. The Output Shafts (E) serve as separate locations for the Crank Handle (C) to be inserted, which
controls extension, retraction, and tensioning of the Lifeline.
After the system is installed, the Attachment O-Rings (G) serve as anchorage connection points through which the user may
connect to the system. The Attachment O-Rings enable the user to work along the length of the Horizontal Lifeline. The Impact
Indicator (F) enables the user to verify that the system has not experienced a fall arrest (or other force of equivalent or greater
strength) during use. If the Impact Indicator is activated, then the user should remove the system from service immediately.
See Table 1 for more information on Component Specifications.
D
E
C
B
Figure 2 - Components
A
3
F
D
G