Setting The Ring Volume; Setting The Beeper Volume - Brother MFC MFC-5840CN Manual

Setting the Ring Volume

You can turn the ring Off or you can select the ring volume level.
1
Menu/Set
Press
2
Press or
▲
Low , Med , High or Off .
Menu/Set
Press
3
Stop/Exit
Press
—OR—
You can adjust the ring volume when your MFC is idle (not being
used). In Fax mode
level. Every time you press these keys, the MFC will ring so you can
hear the active setting as the LCD shows it. The volume changes
with each key press. The new setting will stay until you change it
again.

Setting the Beeper Volume

You can change the beeper volume. The default (factory) setting is
Low . When the beeper is on, the MFC will beep when you press a
key, make a mistake and whenever you send or received a fax.
1
Menu/Set
Press
2
Press or
▲
( Low , Med , High or Off )
Menu/Set
Press
3
Stop/Exit
Press
1 4 1
, , , .
to select
▼
.
.
, press
1 4 2
, , , .
to select your option.
▼
.
.
Volume
1.Ring
or to adjust the volume
Volume
2.Beeper
GETTING STARTED 2 - 5