Dialing Options; Access Codes And Credit Card Numbers; Pause - Brother MFC MFC-5840CN Manual

Dialing options

There are three ways to dial. (See How to dial on page 3-1.)

Access codes and credit card numbers

Sometimes you may want to choose from several long distance
carriers when you make a call. Rates may vary depending on the time
and destination. To take advantage of low rates, you can store the
access codes or long-distance carriers and credit card numbers as
Speed-Dial numbers. You can store these long dialing sequences by
dividing them and setting them up on separate Speed Dial numbers in
any combination. You can even include manual dialing using the dial
pad. (See Storing Speed-Dial numbers on page 5-1.)
For example, perhaps you have stored '555' on Speed-Dial #03 and
'7000' on Speed-Dial #02. If you press
Search/Speed Dial
will dial '555-7000'.
To temporarily change a number, you can substitute part of the
number with manual dialing using the dial pad.
For example, to change the number to 555-7001 you could press
Search/Speed Dial
pad.
If you must wait for another dial tone or signal at any point in the
dialing sequence, store a pause in the number by pressing
Redial/Pause

Pause

Redial/Pause
Press
numbers. If you are dialing overseas, you can press
as many times as needed to increase the length of the pause.
5 - 5 QUICK-DIAL NUMBERS AND DIALING OPTIONS
#02 Black Start
, , and
#03
, and then press
. Each key press adds a 3.5-second delay.
to insert a 3.5-second pause between
Search/Speed Dial
Color Start
or
7001
using the dialing
Redial/Pause
#03
, ,
, you