8
Making copies
Using the MFC as a copier
You can use your MFC as a copier, making up to 99 copies at a time.
Enter Copy mode
Copy
Before making copies, make sure that
(
) is illuminated
Copy
in green. If it is not, press
(
) to enter Copy mode. The
default setting is Fax. You can change the number of seconds or
minutes that the MFC stays in Copy mode. (See Setting the Mode
Timer on page 2-3.)
The LCD shows the default copy setting
Copy Ratio
Quality
No of Copies
8 - 1 MAKING COPIES