Brother MFC MFC-5840CN Manual page 110

The steps below give a brief outline of the Direct Printing
feature. Please see the remaining pages of this chapter for more
detailed instructions.
1
Insert the media card firmly into the media drive (slot).
When you insert your media card
into the proper slot, the LCD shows.
The media active message will be shown for 60 seconds and
then disappear. Even in that case, you can enter the
PhotoCapture mode by pressing
2
PhotoCapture
Press
If your digital camera supports DPOF printing, see DPOF
printing on page 9-8.
3
Print the index that shows thumbnail views of images stored on
your media card. Your MFC will give an image number to each
thumbnail.
Print Index
Press
Color Start
Press
(See Printing the Index (Thumbnails) on page 9-5.)
4
To print images, press
Menu/Set
press
Enter the image number and press
Color Start
Press
(See Printing images on page 9-6.)
You can change the settings for printing images, such as the
Paper Type & Paper Size, Print Size and number of copies.
(See Printing images on page 9-6.)
WALK-UP PHOTOCAPTURE CENTER
.
.
to start printing the index sheet.
or to select Print Images and then
▲ ▼
.
to start printing.
C.Flash Active
Press PhotoCapture key...
PhotoCapture
Menu/Set
.
™
(MFC-5840CN ONLY) 9 - 4
.