Midi Parameters - Roland Aerophone Pro Parameter Manual

Settings Used on this Instrument
Assigning a switch-type controller (S1_1–Ta_2)
* Indications of "***" in the table will contain the following names.
S1_1–2, S2_1–2, X_1–2, C1_1–2, C2_1–2, C3_1–2, C4_1–2, C5_1–2, Tc_1–2, Ta_1–2
* For controllers whose Func parameter is "Off, " their parameters related to the assign settings are not shown.
Value
Indication (Parameter)
*** Func
See "Assign Function List"
*** Release Val
0–127
*** Press Val
Specifies the operation mode.
Latch
*** Mode
Momentary
Assign Function List
Value
Off
CC 01–31, CC33–95
Bend Down
Bend Up
After Touch
Scene Down
Scene Up
Favorite Down
Favorite Up
Chorus Sw
Reverb Sw
Delay Sw
IFX Sw
Unison Sw
Oct Down
Oct Up
Transpose Down
Transpose Up
Drone Sw
Harmony Sw
X-Fade

MIDI Parameters

You can assign a MIDI control function to each controller, and specify how control occurs.
Maximum no. of assignable functions per controller
Breath
Bite, Thumb Pad
Lever Up/Down
Motion
S1, S2, Side Key
* As with Assign, the MIDI control parameters work when the settings in "Asgn Src" (assign source) of each controller of the system are set to
"System. "
If Asgn Src is set to "Scene, " each scene's MIDI control settings are used (p. 5).
12
Range Explanation
No function is assigned.
0–127 Control change
0–127 Bend down
0–127 Bend up
0–127 After touch (Channel Key Pressure)
--- Select previous scene
--- Select next scene
--- Select the previous favorite scene
--- Select the next favorite scene
Off, On Turns the chorus on.
Off, On Turns the reverb on.
Off, On Turns the delay on.
Off, On Turns the IFX on.
Off, On Turns unison on.
--- Octave down
--- Octave up
--- Transpose down (0
--- Transpose up (0
Off, On Turns the drone function on.
Off, On Turns the harmony on.
0–127 Crossfade
8
4
2
2
2
Explanation
Specifies the function that is assigned when each controller is pressed.
Specify the value when you take your finger off the button (Release) and the value
when you press the button (Press).
Each time you press the button, the Press Value and Release Value alternate.
The Press Value is applied while the button is pressed, and the Release Value is applied
while the button is released.
& & &
-1 ... -5 +6 ... )
& & &
+1 ... +6 -5 ... )
Remarks
Not available for breath or bite
control