Table of Contents
Advertisement
Settings Used on this Instrument
Value
Indication (Parameter)
Specifies the fingering mode.
For details on fingering in each mode, refer to "Fingering Chart" (p. 66).
Sax
Recorder
E-Wind
Fingering Mode
Trumpet
Left Hand
Right Hand
Flute
Clarinet
You can add, edit, or delete your preferred fingerings.
* Up to 36 fingering settings can be specified.
* In this mode, transpose and octave shift settings are ignored.
For details on the displayed note name and fingering, refer to "Fingering Chart" (p. 66).
How to add or edit
1 .
2 .
3 .
User Fingering
4 .
5 .
6 .
8
Explanation
Sax fingering
Recorder fingering
This uses standard recorder fingering, with the pitch range expanded by the table key.
With this fingering, the side keys are disabled so that the note does not change even if you
inadvertently press the left or right side key.
Electronic wind instrument fingering
The same "C D E F G A B C" fingering as a standard sax or recorder, with key combinations that
raise/lower the pitch by a semitone.
1, 2, 3, 4, 5, 6, C
Tc, G#, C#
Ta, Tf, Eb, B
Bb
Trumpet fingering
This mode is close to the fingering of a typical brass instrument. Right-hand keys 4, 5, and 6
correspond to pistons 1, 2, and 3 of a trumpet.
Fingering that lets you perform using only the left hand
Fingering that lets you perform using only the right hand
Flute fingering
This uses standard flute fingering, with the pitch range expanded by the below keys.
x, C1, C2, C3
p, B, C4, Tc, Ta
Bb
Clarinet fingering
This uses standard clarinet fingering, with the pitch range expanded by the below keys.
C1
p, C5
Select "User Fingering," and then press the [MENU]
button.
Press a performance key.
The note name appears. If there is no corresponding
note, indicates "NONE. "
While fingering the desired key, press the octave
key [+2].
+2
Use the [C] [A] buttons to change the note name.
Press the [MENU] button.
A confirmation message appears.
To execute the write, press the [A] (YES) button.
If you decide to cancel the write, press the [C] (NO)
button.
An added or disabled fingering is indicated by a "*"
to the right side of the note name.
The same "C D E F G A B C" fingering as a standard sax or recorder
Raise by a semitone
Lower by a semitone
Lower by a whole tone
Raise by a semitone
Lower by a semitone
Lower by a whole tone
Raise by a semitone
Lower by a semitone
How to delete
1 .
Select "User Fingering," and then press the [MENU]
button.
2 .
Press a performance key.
The note name appears. An added or disabled
fingering is indicated by a "*" in the screen.
3 .
While fingering the desired key, press the octave
key [+2].
4 .
Use the [C] [A] buttons to choose "Del."
5 .
Press the [MENU] button.
A confirmation message appears.
6 .
To execute the write, press the [A] (YES) button.
The "*" in the screen disappears.
If you decide to cancel the write, press the [C] (NO)
button.
Advertisement
Table of Contents
