SVC-350 output. To disconnect, re- move the cord from the SVC-350 iirst, then from the ampliiier. clean this unit, wlpe with a cloth dampened with a neutral cleanser. D o not use solvents such as paint thinner.
OPERATION After rnakmg the connections shcwn 3. A d j u s t i n g t h e o u t p u t level: 6. The output level cf the vocoder sound 1 s determined by the OUTPUT shown above and turn on the POWER VOLUME control @ a n d by the volume switch@...
NAMES AND FUNCTIONS OFTHE CONTROLS INPUT SECTION INSTRUMENT Jack INSTRUMENT LEVEL INDICATOR For instruments other than guitar. This the source of mater~al (sound) GUITAR INPUT Jack from which the vocoder soiind is made; Use the guitar output level to adjust therefore, the instrument used should the input level to the vocoder.
Thts c a r ne used to br:dqe yaps where the singer takes a biezttl. For using a foot switch [Roland FS-2) t o switch between the vocoder sound and the direct sound of the microphone.
OUTPUT CONNECTIONS ONLY *USING GUITAR AMP ONLY In the two drawings at the left. the A M P GUITAR AMP vocoder and/or direct microphone sounds do not appear at the GlJlTAR OUTPUT lack@ VOCODER MODE With no connection to the jack.