Roland Aerophone Pro Parameter Manual page 32

Scene Parameters
3 Hall
Parameter Value
PreDelay
0–100
Time 0–127
Size 1–8
High Cut (*6)
Density 0–127
Diffusion
0–127
LF Damp Freq (*7)
LF Damp Gain -36–0 (dB)
HF Damp Freq
(*8)
HF Damp Gain -36–0 (dB)
(*6) 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000,
2500, 3200, 4000, 5000, 6400, 8000, 10000, 12500 (Hz), BYPASS
(*7) 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000,
1250, 1600, 2000, 2500, 3200, 4000 (Hz)
(*8) 4000, 5000, 6400, 8000, 10000, 12500 (Hz)
4 GS Reverb
Parameter Value
ROOM1–3,
HALL1–2,
Character PLATE,
DELAY,
PAN-DELAY
Pre LPF
0–7
Time 0–127
Delay
0–127
Feedback
32
Explanation
Adjusts the delay time from the
direct sound until the reverb
sound is heard.
Adjusts the decay length of the
reverb sound.
Size of room/hall
Adjusts the frequency above
which the high-frequency
portion of the final output sound
is cut (BYPASS: no cut)
Adjusts the density of the reverb
sound.
Adjusts how reverb density
increases over time. (This effect
is especially noticeable with long
reverb times.)
Adjusts the frequency below
which the low-frequency portion
of the reverb sound is cut.
LF damp attenuation amount
(0: no effect)
Adjusts the frequency above
which the high-frequency
portion of the reverb sound is
cut.
HF damp attenuation amount
(0: no effect)
Explanation
Selects the type of reverb.
Adjusts the amount of high-
frequency attenuation for the
sound being input to the reverb.
Adjusts the decay length of the
reverb sound.
Adjusts the level at which the
reverb sound is returned to the
input.
5 SRV-2000
Parameter Value
R0.3, R1.0, R7.0,
R15, R22, R26,
Selection R32, R37, H15,
H22, H26, H32,
H37, P-B, P-A
PreDelay 0–160
Time
0.1–99.0 (sec)
HF Damp
0.05–1.00
Density 0–9
Attack Gain 0–9
Attack Time 0–9
ER Density 0–9
ER Level 0–99
EQ Low Freq 0.04–1.00 (kHz) Frequency of the low range.
EQ Low Gain -24–+12 (dB)
EQ Mid Freq
0.25–9.99 (kHz) Frequency of the middle range.
EQ Mid Gain
-24–+12 (dB)
EQ Mid Q 0.2–9.0
EQ Hi Freq 0.80–9.99 (kHz) Frequency of the high range.
EQ Hi Gain -24–+12 (dB)
EQ Hi Q 0.2–9.0
Explanation
Selects the type of reverb offered
by the Roland SRV-2000 digital
reverb.
Adjusts the delay time from the
direct sound until the reverb
sound is heard.
Adjusts the decay length of the
reverb sound.
Adjusts the high-frequency
portion of the reverb.
Adjusts the density of the late
reverberation.
Adjusts the gain of the early
reflections.
Adjusts the time of the early
reflections.
Adjusts the density of the early
reflections.
Adjusts the volume of the early
reflections.
Gain of the low range.
Gain of the middle range.
Width of the middle range.
Set a higher value to narrow the
range to be affected.
Gain of the high range
Specifies the width of the high-
frequency range.
Set a higher value to narrow the
range to be affected.