9 Assign settings
Parameter
Value
Assign Function
Input Min, Max
For details on the parameters, refer to "Assigning a continuously-variable controller (Breath_1–Motion_2)" (p. 10).
Output Min, Max
* Input Min, Max are set in the Breath–Thumb Pad parameters.
Assign Mode
Curve
SCENE/CONTROL SOURCE (INT)
* This is enabled when the Contorl Source Select system parameter is "Scene. "
Parameter
Value
OFF, CC01–31, CC33–95, BEND,
Control Source 1–4
AFTER TOUCH
SCENE/ASSIGN (MIDI)
* These settings are enabled when MIDI control mode is on, and when the following system parameters (p. 5, p. 5) are set to "Scene. "
Asgn Src Breath
Asgn Src Bite
Asgn Src Lever
Asgn Src Thumb Pad
Asgn Src Motion
Asgn Src S1/S2
Asgn Src Key
Controller
Breath
1–8
Bite Down
1–4
Bite Up
Thumb Lever Down
1, 2
Thumb Lever Up
Thumb Pad
1–4
Motion
2
S1, S2
1, 2
X, C1–5, Tc, Ta
1, 2
9 Assign settings
Parameter
Value
Assign Function
Input Min, Max
For details on the parameters, refer to "Assigning a continuously-variable controller (Breath_1–Motion_2)" (p. 13).
Output Min, Max
* Input Min, Max are set in the Breath–Thumb Pad parameters.
Assign Mode
Curve
Explanation
Explanation
Sets the MIDI messages to be used as tone controls.
Explanation
Assigns the settings for MIDI control with the breath controller.
Assigns the settings for MIDI control with the bite controller.
Assigns the settings for MIDI control with the thumb lever.
Assigns the settings for MIDI control with the thumb pad.
Assigns the settings for the motion controller.
Assigns the settings for MIDI control with the [S1] and [S2] buttons.
Assigns the settings for MIDI control with the [X] key and the side keys ([C1]–[C5], [Tc] and [Ta]).
Explanation
Scene Parameters
23