Table of Contents
Advertisement
Value
Indication (Parameter)
These parameters set how the motion sensors control the sound.
Off
Normal
Motion Ctrl Mode
Vibrato
These parameters configure the detection range of the motion sensors.
Motion_1 Setting
Motion_2 Setting
Elevation
Tilt
Tilt Full
Tilt Left
Tilt Right
Motion Sense (Vib)
1–10
Bend Range Motion Dn
0–2400 (cent)
Bend Range Motion Up
Asgn Src Breath
Asgn Src Bite
Asgn Src Lever
Asgn Src Thumb Pad
System, Scene
Asgn Src Motion
Asgn Src S1/S2
Asgn Src Key
Harmony Source
Explanation
Turns off the motion sensor control.
Tilting the AE-30 controls the functions that are assigned in the Assign parameters.
The tilt detection range is set in Motion_1 Setting and Motion_2 Setting.
Lets you controls the pitch when you make cyclic changes to how the AE-30 is tilted.
Gives a vibrato-like effect when you repeatedly move the AE-30 up and down.
Elevation
Tilt
MIDI controller value
127
64
127
0
-90–90°
0–180 °
The motion of lifting the AE-30 up is used. This works through the range of tilting the
instrument up to 180º upwards.
The motion of tilting the AE-30 either to the left or to the right is used. This works through
the range of tilting the instrument up to 90º to the left or right.
The motion of tilting the AE-30 either to the left or to the right is used. The base value is
when the instrument is tilted 90º to the left, and this works through the range of tilting the
instrument up to 90º to the right.
The motion of tilting the AE-30 to the left is used. This works through the range of tilting
the instrument up to 90º to the left.
The motion of tilting the AE-30 to the right is used. This works through the range of tilting
the instrument up to 90º to the right.
Sets the sensitivity when Motion Ctrl Mode is set to "Vibrato. " Increase this value if you want
to make the effect easier to apply; lower this value if the effect is too strong.
Sets the bend range in cents, when "Bend Up/Down" is assigned to the motion control.
* This is enabled when Bend Range Source is "System. "
Selects whether to use the system settings (System) or the settings in each scene (Scene)
for the Assign or MIDI parameter that is assigned to the breath control.
Selects whether to use the system settings (System) or the settings in each scene (Scene)
for the Assign or MIDI parameter that is assigned to the bite control.
Selects whether to use the system settings (System) or the settings in each scene (Scene)
for the Assign or MIDI parameter that is assigned to the thumb lever.
Selects whether to use the system settings (System) or the settings in each scene (Scene)
for the Assign or MIDI parameter that is assigned to the thumb pad.
Selects whether to use the system settings (System) or the settings in each scene (Scene)
for the Assign or MIDI parameter that is assigned to the motion control.
Selects whether to use the system settings (System) or the settings in each scene (Scene)
for the Assign or MIDI parameter that is assigned to the [S1]/[S2] buttons.
Selects whether to use the system settings (System) or the settings in each scene (Scene)
for the Assign or MIDI parameter that is assigned to the performance keys.
Selects whether to use the system harmony settings (System) or the harmony settings in
each scene (Scene).
Tilt Full
127
0
0
64
-90–90°
Settings Used on this Instrument
Tilt Left
127
127
0
-90–0°
Tilt Right
127
0
0–90°
5
Advertisement
Table of Contents
