Roland Aerophone Pro Parameter Manual page 30

Scene Parameters
3 Delay 0 Trem (Delay 0 Tremolo)
Tremolo is applied to the delay sound.
Parameter Value
MONAURAL
Input Mode
STEREO
Delay Time
OFF, ON
(sync sw)
Delay Time
1–1300
(msec)
Delay Time
Note (*1)
(note)
Feedback -98–+98 (%)
HF Damp (*2)
Tremolo Switch OFF, ON
Modulation Wave
TRI
SQR
Tremolo Mod
SIN
Wave
SAW1
SAW2
TRP
Tremolo Rate
OFF, ON
(sync sw)
Tremolo Rate
0.05–10.00 (Hz)
(Hz)
Tremolo Rate
Note (*1)
(note)
Tremolo Depth 0–127
4 2Tap PanDly (2 Tap Pan Delay)
Delayed sound is heard from the two locations you specify.
Parameter Value
Delay Time
OFF, ON
(sync sw)
Delay Time
1–1300
(msec)
Delay Time
Note (*1)
(note)
Feedback -98–+98 (%)
HF Damp (*2)
Delay 1 Pan L64–63R
Delay 2 Pan L64–63R
Delay 1 Level 0–127
Delay 2 Level 0–127
30
Explanation
The input is mono-mixed.
The sound is input in stereo.
If this is "ON, " the delay
synchronizes with the tempo.
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which the delay sound fed
back to the effect is filtered out
(BYPASS: no cut).
Switches the tremolo effect on/off
Triangle wave
Square wave
Sine wave
Sawtooth wave
Trapezoidal wave
If this is "ON, " the tremolo
synchronizes with the tempo.
Tremolo rate
Tremolo depth
Explanation
If this is "ON, " the delay
synchronizes with the tempo.
Adjusts the delay time from the
direct sound until the second
delay sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which the delay sound fed
back to the effect is filtered out
(BYPASS: no cut).
Stereo location of Delay 1
Stereo location of Delay 2
Volume of Delay 1
Volume of Delay 2
5 3Tap PanDly (3 Tap Pan Delay)
Delayed sound is heard from the three locations you specify.
Parameter Value
Delay Time
OFF, ON
(sync sw)
Delay Time
1–2600
(msec)
Delay Time
Note (*1)
(note)
Feedback -98–+98 (%)
HF Damp (*2)
Delay 1 Pan L64–63R
Delay 2 Pan L64–63R
Delay 3 Pan L64–63R
Delay 1 Level 0–127
Delay 2 Level
0–127
Delay 3 Level 0–127
(*1) 1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T,
1/8., 1/4, 1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
(*2) 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500,
3150, 4000, 5000, 6300, 8000 (Hz), BYPASS
Explanation
If this is "ON, " the delay
synchronizes with the tempo.
Adjusts the delay time from the
direct sound until the third delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which the delay sound fed
back to the effect is filtered out
(BYPASS: no cut).
Stereo location of Delay 1
Stereo location of Delay 2
Stereo location of Delay 3
Volume of Delay 1
Volume of Delay 2
Volume of Delay 3