Table of Contents
Advertisement
Scene Parameters
SCENE/CHORUS
Parameter
Value
CH SW
OFF, ON
Selects the chorus type.
Chorus Type
OFF, 1 Chorus, 2 CE-1, 3 SDD-320, 4 JUNO-106 Chorus
FX
Configure the parameters of the selected chorus type.
Chorus parameters
See "Chorus parameters"
OUTPUT
Chorus Level
0–127
Reverb Send Level
0–127
Chorus Parameters
1 Chorus
This is a stereo chorus.
Parameter
Value
Rate
0–127
Depth
0–127
Feedback
0–127
2 CE-1 (Chorus)
This models the classic BOSS CE-1 chorus effect unit. It provides a
chorus sound with a distinctively analog warmth.
Parameter
Value
Intensity
0–127
3 SDD-320 (Dimension D)
This models Roland's DIMENSION D (SDD-320). It provides a clear
chorus sound.
Parameter
Value
1, 2, 3, 4, 1+4,
Mode
2+4, 3+4
28
Explanation
Turns the chorus on/off.
The available parameters differ depending on the type of chorus you selected in
Chorus Type.
Sets the amount of chorus.
If you don't want to add the chorus effect, set it to 0.
Sets the amount of reverb.
If you don't want to add the reverb effect, set it to 0.
Explanation
Frequency of modulation
Depth of modulation
Level at which chorus sound is
returned to the input
Explanation
Chorus depth
Explanation
Switches the mode.
4 JUNO-106 Chorus
This models the chorus effects of the Roland JUNO-106.
Parameter
Value
I, II, I+II, JX I,
Mode
JX II
Noise Level
0–127
Explanation
Type of Chorus
I+II:
The state when two buttons
are pressed simultaneously.
Amount of noise produced by
the chorus
Advertisement
Table of Contents
