Racelogic VBOX Micro Manual page 12

General
1. Connection - Selected COM port, refresh and disconnect buttons.
2. Units - Specify the distance, acceleration & velocity units.
3. VBOX Information - Serial number and installed firmware version of connected unit.
4. Load/Save Configuration - Load/Save settings from/into a Racelogic setting file (.RSF).
5. Language - Select an operating language.
6. Diagnostics - Live preview of satellites, latitude, longitude, velocity & accumulative distance.
7. GPS Information - Reports the internal GPS engine type and allows user to coldstart the unit.
8. Write to unit - After making changes to setup, the write to unit button must be selected to upload settings.
https://racelogic.support//01VBOX_data_loggers/VBOX_Micro/VBOX_Micro_-_User_manual/05_-_VBOX_Micro_Configuration
12