Automatic Transmission; Manual And Automatic Fax Redial; Receiving Faxes; Select Answer Mode - Brother FAX1 570MC Owner's Manual

See
4
Speed Dial
5
p. 22

Automatic Transmission

This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset or press
1
2
3

Manual and Automatic Fax Redial

If you're sending a fax manually and the line is busy, press
the number.
If you're sending a fax automatically, and if the line is busy, the FAX/MFC will
redial automatically up to three times at 5 minute intervals.

Receiving Faxes

Select Answer Mode

See
Manual—You must answer all calls yourself. If you hear fax tones, press
Distinctive
begin receiving the fax, then hang up. You can use this mode with Distinctive Ringing.
Ringing
pp. 51-52
Fax Only—The FAX/MFC automatically answers every call as a fax call. You
cannot receive a voice call, but you can dial out and make a voice call.
See
F/T—The FAX/MFC automatically answers every call. If the call is a fax, it prints
F/T (Fax/Tel)
the fax. If the call is not a fax, it signals you with a double ring (ring-ring),
Mode Only
different from the phone company ringing, to alert you to pick up the call. If you
p. 50
select this setting, you'll need to set the Ring Delay and F/T Ring Time features
(on the following pages). If you have extension phones on the same line as the
FAX/MFC, set Ring Delay to 4.
When you hear the fax tone, press
If you're using the handset, hang up.
Insert the document face down in the feeder.
Enter the fax number using One Touch, Speed Dial, Tel-index or the dial
pad.
Press Start .
B A S I C F A X O P E R A T I O N
Start .
Speaker Phone
Redial/Pause
33
.
to retry
Start to