One Touch Dialing; Speed Dialing; Hold; Pause - Brother FAX1 570MC Owner's Manual

40
C H A P T E R S I X
See
Storing One
Touch Dial
Numbers
pp. 20-21
See
Storing
Speed Dial
Numbers
p. 22

One Touch Dialing

1
Pick up the handset—OR—Press
2
When you hear a dial tone, press the One Touch key of the location you want
to call.
If you try to use a One Touch location with no number stored in it, you hear
a warning sound, and the screen displays NOT REGISTERED. The display
returns to normal after 2 seconds.

Speed Dialing

1
Pick up the handset—OR—Press
2
When you hear a dial tone, press
Speed Dial number.
3
To hang up, replace the handset—OR—Press

Hold

1 Press Hold to put a call on Hold.
2 You can put down the handset without disconnecting the call.
3
Pick up the FAX/MFC handset to release the call from Hold. Picking up an
extension handset will not release the call from Hold.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers.

Tone/Pulse

If you have pulse dialing service, but need to send tone signals (for telephone
banking, for example), follow the directions below. If you have touch tone service,
you do not need this feature to send tone signals.
1 Lift the handset.
2
Press . Any digits dialed after this send tone signals.
3
When you hang up, the FAX/MFC returns to pulse dialing service.
Speaker Phone .
Speaker Phone .
Speed Dial , then press the two-digit
Speaker Phone .