Alternating Displays; Function Selection Table - Brother FAX1 570MC Owner's Manual

26
C H A P T E R F O U R

Alternating Displays

When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about how
to proceed. The display you'll probably see most often is shown below, showing
you, when you place a document in the feeder, that you can dial a number and
send a fax, or you can make a copy.
FAX: NO. & START
COPY: PRESS COPY

Function Selection Table

If you have a basic understanding of how to program a fax machine, you can
perform most of the programming settings without the Owner's Manual. To help
you understand the function selections, options, and settings that are found in
your fax and Message Center programs, use the Function Selection Table below.
1. TEMP. SETTINGS
Function
1. TIMER
2. POLLING
3. CALL RESERVE
4. CONTRAST
5. RESOLUTION
6. OVERSEAS MODE
7. COVERPAGE
2. CANCEL JOB
Function
Description
Send documents later.
Retrieve faxes from another
machine.
You can send a fax, then speak.
Change lightness or darkness
of fax you're sending.
Allows you to change resolution
page by page.
Adjusts for sometimes difficult
overseas transmissions.
Automatically sends cover page
you program.
Description
Cancel a timed or polled job.
Factory Set More Info
-- p. 44
OFF pp. 54–56
OFF pp. 48–49
AUTO p. 32
STANDARD pp. 32, 50
OFF p. 45
OFF pp. 47–48
Factory Set More Info
p.45