Table of Contents
Advertisement
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there, then
prompts you to either
1
Press
change.
2
If you want to erase the number, press
of the digits.
3
If you want to change a digit, use
digit you want to change, then press
4
Enter a new number.
5
Follow the directions from Step 4 in Storing One Touch Numbers or Storing
Speed Dial Numbers.
Setting Up Groups
for Broadcasting
See
Groups allow you to send the same fax message to many fax numbers by pressing
Storing
only one One Touch key (Broadcasting). First, you'll need to store each fax
One Touch
number as a One Touch or Speed Dial number. Then, you can combine them
Dial
into a Group. Each Group uses a One Touch key. Finally, you can have up to 6
Numbers
pp. 20-21
small Groups, or you can assign many numbers to one large group. If you have
and
Model MFC 1870MC you can assign up to 59 numbers to one large group, and for
Storing
Models FAX 1570MC and MFC 1970MC up to 123 numbers to one large group.
Speed Dial
Numbers
1
Press
p. 22
2
Select a One Touch key where you wish to store the number. (For example,
press One Touch key
3
Use the dial pad to enter the Group number (for example, press
Group 1).
1. CHANGE
—OR—
to change the number stored, or press
1
Function
,
4
,
3
. The screen displays:
SELECT ONE-TOUCH
to use as a group.)
02
SETUP GROUP:GO
ENTER & SET
F A X S E T T I N G S
2. EXIT.
to exit without making a
2
Clear
when the cursor is to the far left
or
to position the cursor under the
Clear
.
23
for
1
Advertisement
Table of Contents
