SoftBank Whiz Support Manual page 4

When the dustbag is full and the error message appears, replace with a new dustbag.
1 1
Tap at the upper right
Make sure the side of the
4 4
illustration of the new dustbag
faces upwards, and install it
Reboot the Machine
1 1
Turn the main power
switch OFF ( O )
4 4
Pull out the battery with
both hands
Replace with a New Dustbag
2 2
Remove the dustbin cover
5 5
2 2
Check that the secondary
battery power is OFF
5 5
Insert the battery into
the battery compartment
Wait for
30 seconds
after removing
the battery
Check the dustbin pin
is afloat
3 3
Remove the used dustbag
6 6
Close the dustbin cover
①
3 3
Press the battery lock
Be careful not to let your thumb get caught
6 6
Turn the main power
switch ON ( l )
②
4