Table of Contents
Advertisement
3. SPECIFICATIONS
3.2 Performance Specifications
The following describes the performance specifications of the RFID interface module.
Item
Connectable antenna
RFID
side
Number of connectable
antennas
CC-Link station type
CC-Link version
Station number selections
Transmission speed
CC-Link
side
Number of occupied stations
and data transfer volume
Connection cable
External power supply
Noise resistance
Withstand voltage
Insulation resistance
Outer dimensions
Weight
External
Communication area,
connection
module power supply area
method
Module installation screws
Applicable DIN rail
Applicable crimp terminals
Applicable Compression tools for wire
connectors
*1. The value includes the command code specification area, etc., as well.
3 - 2
Table 3.1 Performance Specifications
V680-HA63A+V680-HS□□
V680-HA63B+V680-HS□□
With 2 occupied stations: Station numbers 1 to 63
With 4 occupied stations: Station numbers 1 to 61
156kbps/625kbps/2.5Mbps/5Mbps/10Mbps (selectable)
Number of
CC-Link
occupied
version
stations
2 occupied
stations
Ver.1.10
4 occupied
stations
2 occupied
Ver.2.0
stations
Ver. 1.10 compatible CC-Link dedicated cable
CC-Link dedicated cable (Ver. 1.00 compatible)
CC-Link dedicated high performance cable (Ver. 1.00 compatible)
24V DC (20.4 to 26.4V DC) (ripple rate: within 5%)
Current consumption: 0.33A
DC-type noise voltage 500Vp-p, noise width 1μs, based on a noise simulator with
a noise frequency of 25 to 60Hz
All DC external terminals – Ground: 500V AC, 1 minute
All DC external terminals – Ground: 500V DC,
10MΩ using insulation resistance tester
65(H)X150(W)X45(D)[mm]
7-point 2-piece terminal block [transmission circuit, module power supply, FG]
M3 x 5.2 screws (tightening torque range: 4.70 to 5.22in•lbs (0.54 to 0.59N•m)
Number of inserted compatible crimp terminals: 2 or less
M4 screw with plain washer finished round
(tightening torque range: 0.79 to 1.08N•m)
DIN rail installable, installable in 6 directions
TH35-7.5Fe, TH35-7.5Al (JIS C 2812 compliant)
• N1.25-3 (JST Mfg. Co., Ltd.)
[compatible wire size : 0.3 to 1.25mm
• N2-MS3 (JST Mfg. Co., Ltd.)
[compatible wire size : 1.25 to 2.0mm
• YNT-2216 (JST Mfg. Co., Ltd.),
T-212 (Nippon Tanshi Co., Ltd.),
NH11 (Nichifu Co., Ltd.)
[compatible wire size : 0.3 to 1.25mm
• YNT-1614 (JST Mfg. Co., Ltd.),
T-221N (Nippon Tanshi Co., Ltd.),
NH12 (Nichifu Co., Ltd.)
[compatible wire size : 1.25 to 2.0mm
Specifications
V680-H01-V2
1 antenna
Remote device station
Ver. 1.10 and Ver. 2.0
Expanded
Data transfer
*1
cyclic setting
volume
8 words
16 words
Double
16 words
Quadruple
32 words
Octuple
64 words
0.3kg
2
(AWG20 to 16)]
2
(AWG16 to 14)]
2
(AWG20 to 16)]
2
(AWG16 to 14)]
3
Amount of data
readable/writable with
one ID command
10 bytes
26 bytes
26 bytes
58 bytes
122 bytes
3 - 2
Advertisement
Table of Contents
