6. HOW TO COMMUNICATE WITH ID TAGS
ID tag write processing
Y
ID command complete processing
ID command error processing
End processing
6 - 26
Add processing when Read ends normally here.
Add processing when Write ends normally here.
Add processing when an error occurs in the ID command here.
Turn the Write to ID Tag instruction ON
Set the command code specification
(RWw0) to "Write" (set value = 1)
Set the start address specification
(RWw1) of the ID tag for writing data to 40
Set the number of processing points specification
(RWw2) for writing data to 26 bytes
Write data specification (RWw3 to RWwF)
Turn the ID command execution
request (RY4) ON
Execute the ID command (Write)
Store read data (RWr3 to RWrF)
Store error details (RWr1)
Turn the ID command execution
request (RY4) OFF
Turn the Read ID Tag instruction OFF
Turn the Write to ID Tag instruction OFF
6 - 26