Chapter 1 Overview; Rfid Interface Module Overview - Mitsubishi Electric RFID ECL2-V680D1 User Manual

1. OVERVIEW

Chapter 1 OVERVIEW

This user's manual describes the specifications, use, programming method, and other
information related to the ECL2-V680D1 RFID interface module used as a remote
device station of a CC-Link system.
The RFID interface module connects to the CC-Link master station of a Mitsubishi
general-purpose programmable controller (MELSEC-Q series, MELSEC-L series,
MELSEC-F series, MELSEC-AnS/QnAS series, and MELSEC-A/QnA series), enabling
reading and writing with OMRON RFID system V680 series ID tags as a remote device
station of a CC-Link system.
When utilizing the program examples introduced in this manual in an actual system, be
sure to fully verify that use will not be problematic in the control of the target system.

1.1 RFID Interface Module Overview

The RFID interface module has a channel that connects to a V680 series antenna, and
fulfills the role as an interface for V680 series ID tag reading and writing and the
programmable controller CPU via CC-Link.
CC-Link master/local module (master station)
Terminating
resistor
(Intelligent device station)
Terminating
resistor
1 - 1
CC-Link master/local module (local station)
CC-Link dedicated cable
ECL2-V680D1
(Remote device station)
(Remote I/O station)
(Remote device station)
Antenna
Data reading and
writing with ID tag
by electromagnetic
induction (non-contact)
Amplifier
1
ID tag
1 - 1