Renesas E2 Lite User Manual page 17

E2 Lite
(a) Host-side connector
(b) Host-side connector
mark
(a) 14-pin user-side
connector
(b) 20-pin user-side
connector
(c) User-side connector
mark
(d) GND
R20UT3240EJ0300 Rev.3.00
May.15.20
E2 Lite
USB
(a)
A USB connector for the host machine.
Be sure to connect the provided USB interface cable.
Marked "USB".
A connector for the host machine is provided at the side of this mark.
Figure 1.4 E2 Lite Host-Side View
E2 Lite
E2 Lite
ACT
This is for the connection of a 14-pin user-system interface cable.
This is for the connection of a 20-pin to 20-pin user-system interface cable
(separately available) or a 20-pin to 10-pin user-system interface cable.
Marked "USER I/F".
The connectors for the user-system interface cables is placed to the side of
this mark.
This is not used.
Figure 1.5 E2 Lite User-Side Top View
(b)
(c) (a)
VCC
USER I/F
RESET
GND
(b) (d)
Outline
Page 17 of 36