Avaya Virtual Services Platform 7000 Series Troubleshooting Manual page 77

Checking the global IP routing status
Determine if IP routing is globally enabled or disabled.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Enter the show ip routing command.
3. Observe if IP routing is globally enabled or disabled.
Enabling IP routing globally
Enable IP routing globally for a switch or stack.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Enter the ip routing command.
Checking VLAN IP routing status
Determine if IP routing is enabled or disabled for one or more VLANs.
Procedure
1. Enter Privileged EXEC mode:
enable
2. Enter the show vlan ip [<vid>] command.
3. Observe whether IP routing is enabled or disabled.
Enabling IP routing for a VLAN
Enable IP routing for a specific VLAN.
Procedure
1. Enter VLAN Interface Configuration mode:
enable
configure terminal
interface vlan <1–4094>
2. Enter the ip routing command to enable IP routing for the VLAN.
July 2015
Comments on this document? infodev@avaya.com
Failure to establish OSPF adjacency
Troubleshooting Avaya VSP 7000 Series
77