Avaya Virtual Services Platform 7000 Series Installation Manual
  1. Manuals
  2. Brands
  3. Avaya Manuals
  4. Server
  5. Virtual Services Platform 7000 Series
  6. Installation manual
Avaya Virtual Services Platform 7000 Series Installation Manual

Avaya Virtual Services Platform 7000 Series Installation Manual

Installing transceivers and optical components
Hide thumbs Also See for Virtual Services Platform 7000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Installing Transceivers and Optical
Components on Avaya Virtual Services
Platform 7000 Series
Release 10.3.2
NN47202-302
Issue 03.01
August 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Virtual Services Platform 7000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Avaya Virtual Services Platform 7000 Series

Summary of Contents for Avaya Virtual Services Platform 7000 Series

  • Page 1 Installing Transceivers and Optical Components on Avaya Virtual Services Platform 7000 Series Release 10.3.2 NN47202-302 Issue 03.01 August 2014...
  • Page 2 INSTALLS AVAYA SOFTWARE, PURCHASED FROM AVAYA INC., written consent of Avaya can be a criminal, as well as a civil offense ANY AVAYA AFFILIATE, OR AN AVAYA CHANNEL PARTNER (AS under the applicable law.
  • Page 3 Product or Hosted Service notices and articles, or to report a problem with your Avaya Product or Hosted Service. For a list of support telephone numbers and contact addresses, go to the Avaya Support website: http://support.avaya.com (or such successor site as designated by Avaya), scroll to the bottom of the page, and select Contact Avaya Support.

  • Page 4: Table Of Contents

    Installing an SFP+ ...................... 47 Removing an SFP+ ....................... 48 SFP+ specifications ........................ 49 SFP+ labels ....................  49 General SFP+ specifications .......................... 50 SFP+s Chapter 7: QSFP+ transceivers.....................  59 Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 5 Installing a QSFP+ transceiver .................. 62 Removing a QSFP+ transceiver ...................  63 QSFP+ transceiver specifications .................... 63 QSFP+ transceiver labels ................. 64 General QSFP+ transceiver specifications ...................... 64 QSFP+ transceivers August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 6: Chapter 1: Introduction

    • SFP plus (SFP+) transceivers Related resources Documentation For a list of the documentation for this product, see Documentation Roadmap Reference for Avaya Virtual Services Platform 7000 Series, NN47202–103. Training Ongoing product training is available. For more information or to register, see http://avaya- learning.com/.

  • Page 7: Support

    Support About this task Videos are available on the Avaya Support web site, listed under the video document type, and on the Avaya-run channel on YouTube. Procedure • To find videos on the Avaya Support web site, go to http://support.avaya.com, select the product name, and select the videos checkbox to see a list of available videos.
  • Page 8 The search results show the number of documents and instances found. You can sort the search results by Relevance Ranking, Date Modified, Filename, or Location. The default is Relevance Ranking. Related Links Support on page 7 Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

  • Page 9: Chapter 2: New In This Release

    See the following section for information about feature changes. QSFP+ transceivers Feature Pack Release 10.3.2 adds support for Avaya Quad (4-channel) Small Form Factor Pluggable Plus (QSFP+) transceivers. QSFP+ transceivers interface with the 7002QQ-MDA to provide VSP 7000 Series switches with 40 Gbps connection speeds over various media types and distances.

  • Page 10: Other Changes

    • 10GBASE-ZR CWDM DDI SFP+ specifications on page 57 For more information about DDM, see Configuring System Monitoring on Avaya Virtual Services Platform 7000 Series, NN47202–505. Other changes See the following sections for information about changes that are not feature-related.

  • Page 11: Chapter 3: Safety Messages

    El aviso de ESD brinda información acerca de cómo evitar una descarga de electricidad estática y el daño posterior a los productos Avaya. Electrostatic alert: CUIDADO ESD August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 12 Le indicazioni di attenzione forniscono informazioni per evitare possibili interruzioni del servizio o danni ai prodotti Avaya. Warning Notice Warning: Warning notices provide information about how to avoid personal injury when working with Avaya products. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 13 La mention Avertissement fournit des informations sur les moyens de prévenir les risques de blessure lors de la manipulation de produits Avaya. Warning: WARNUNG Warnhinweise bieten Informationen dazu, wie man Personenschäden bei der Arbeit mit Avaya- Produkten verhindert. Warning: ADVERTENCIA Los avisos de Advertencia brindan información acerca de cómo prevenir las lesiones a...
  • Page 14 Danger: PERICOLO Le indicazioni di pericolo forniscono informazioni per evitare situazioni o condizioni che potrebbero causare gravi danni alle persone o il decesso. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

  • Page 15: Translations Of Safety Messages

    Este dispositivo é um produto Classe A. Operar este equipamento em uma área residencial provavelmente causará interferência prejudicial; neste caso, espera-se que os usuários tomem as medidas necessárias para corrigir a interferência por sua própria conta. Caution: ATTENZIONE August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 16 (ESD) quando estiver realizando a manutenção deste produto. Certifique-se de que a pulseira esteja em contato com sua pele. Electrostatic alert: ATTENZIONE Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 17 Nunca olhe para dentro da fibra ótica ou da porta do conector. Tenha sempre em mente que os cabos de fibra ótica estão ligados a uma fonte de luz. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 18 Ao inspecionar um conector, verifique se as fontes luminosas estão desligadas. A fonte luminosa usada nos cabos de fibra ótica pode causar danos a seus olhos. Warning: AVVISO Rischio di lesioni agli occhi Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 19 Utilice gafas de seguridad cuando trabaje con alcohol isopropilo para evitar irritación en los ojos. Warning: AVISO Risco de ferimento nos olhos August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 20 Evite aplastar los cables de fibra óptica. Si el cable de fibra óptica se encuentra en la misma bandeja o conducto que otros cables eléctricos grandes y pesados, puede dañarse. Caution: CUIDADO Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 21 Staubkappe oder einem optischen Steckverbinder. Zur Vermeidung von Verunreinigungen des hinteren Muffenteils durch Öl von den Fingern oder durch andere Kontaminationsstoffe behandeln Sie die Anschlüsse vorsichtig. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 22 SFPs are keyed to prevent incorrect insertion. If the SFP resists pressure, do not force it; turn it over, and reinsert it. Caution: ATTENTION Risques d'endommagement de l'équipement Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 23 Gli SFP dispongono di chiavi in modo da evitarne l'inserimento errato. Se l'SFP resiste alla pressione, non forzarlo ma capovolgerlo e reinserirlo. Related Links Safety messages on page 11 August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 24: Chapter 4: Equipment Care

    You must keep fiber optic equipment connections clean and damage-free. Use the information in this job aid to properly maintain and care for fiber optic equipment. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 25 The proper connector cleaning method depends on the connector contaminants: • Judge cleanliness by visual inspection with a fiber microscope. First inspect the connector, and then clean as required. Warning: Risk of eye injury August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 26: Cleaning Single Connectors

    When you inspect a connector, ensure that light sources are off. The light source used in fiber optic cables can damage your eyes. To avoid getting debris in your eyes, wear safety glasses when you work with the canned air duster. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

  • Page 27: Cleaning Duplex Connectors

    Risk of eye injury When you inspect a connector, ensure that light sources are off. The light source in fiber optic cables can damage your eyes. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 28: Cleaning Receptacles

    • You need a high-quality canned compressed air with extension tube. Compressed air must be free of dust, water, and oil, or filmy deposits or scratches on the surface of the connector can result. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 29 If you do not reinstall the connector, use a protective cap. If problems persist, ensure that the connector or receptacle is free from damage. Related Links Equipment care on page 24 August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 30: Chapter 5: Sfp

    3. If the media is optical fiber, determine wavelength restrictions or requirements. To expand available bandwidth on a common optical fiber, use Coarse Wavelength Division Multiplexing (CWDM) SFPs. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 31 All components are color-coded by wavelength. Important: The attainable cable length can vary depending on the quality of the fiber optic cable used. The following table lists and describes the Avaya SFP models the Virtual Services Platform 7000 Series supports. Model...

  • Page 32: Installing An Sfp

    • Verify that the SFP is the correct model for your network configuration. • Verify the ports are configured to support SFP (10Gbps) transceivers. • Before you install the optical connector, ensure it is clean. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 33 Apply a light pressure to the SFP until the device clicks and locks into position in the port. Important: The lower port row is inverted. You must invert the SFP device to correctly insert the device into a lower port. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 34: Removing An Sfp

    Remove an SFP to replace it or to commission it elsewhere. Before you begin • Wear an antistatic wrist strap. Warning: Risk of eye injury by laser Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

  • Page 35: Sfp Specifications

    SFP labels The Avaya label on a typical SFP contains an Avaya serial number, a bar code, a manufacturer code, an interface type, and a part number. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 36: General Sfp Specifications

    – 40 to 85C Maximum supply current 300 mA unless otherwise stated Maximum power consumption 1.0 W unless otherwise stated SFPs The following sections provide specifications for supported SFPs: Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 37 This SFP provides 1000BASE-LX gigabit Ethernet connectivity at 1310 nanometers (nm) using single mode or multimode optical fiber. The part number of this SFP is AA1419049-E6. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 38 Link optical power budget 18 dB Transmitter characteristics Launch power – 4.5 to 0 dBm Receiver characteristics Receiver sensitivity – 22.5 dBm Maximum receiver power 0 dBm Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 39 Table 7: 1000BASE-ZX DDI 1550 nm SFP specifications Parameter Specification Maximum electrical power consumption 1.0 W Connectors Duplex LC Cabling SMF, 9 μm August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 40 The long wavelength optical transceivers used in these models provide variable distance ranges using single mode fiber optic cabling. The following table describes standards, connectors, cabling, and distances for the 1000BASE-BX SFP. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 41 1.25 Gb/s Link optical power budget 30 dB Maximum dispersion power penalty 2.0 dB at 120 km Minimum attenuation between transmit and receive 14 dB ports August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 42 Minimum attenuation between transmit and receive 4 dB ports Transmitter characteristics Launch power – 4.0 to 1.0 dBm Receiver characteristics Receiver sensitivity – 21 dBm Maximum receiver power – 3.0 dBm Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 43 Minimum attenuation between transmit and receive 8 dB ports Transmitter characteristics Launch power 0 to 5.0 dBm Receiver characteristics Receiver sensitivity – 24 dBm Maximum receiver power – 3.0 dBm August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 44: Chapter 6: Sfp

    SFPs in physical appearance but SFP+ transceivers provide Ethernet at 10 gigabit per second (Gb/s). Important: Avaya recommends that you only use Avaya-qualified transceivers. If you use other vendor transceivers, Avaya does not support them. Warning: Risk of equipment damage Do not apply vertical pressure when you insert and remove the transceiver.

  • Page 45: Installing An Sfp

    SFP+ transceivers are hot-swappable input and output enhancement components that allow 10 Gigabit Ethernet ports to link with other 10 Gb Ethernet ports. All Avaya SFP+ transceivers use LC Duplex connectors to provide precision keying and low interface losses. The following table lists and describes the Avaya SFP+ models.
  • Page 46 Apply a light pressure to the SFP+ until the device clicks and locks into position in the port. Important: The lower port row is inverted. You must invert the SFP+ device to correctly insert the device into a lower port. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

  • Page 47: Removing An Sfp

    Removing an SFP+ Remove an SFP+ to replace it or to commission it elsewhere. About this task Warning: Risk of eye injury by laser August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 48: Sfp+ Specifications

    All Avaya SFP+ transceivers support Digital Diagnostic Monitoring (DDM). Important: Avaya recommends that you only use Avaya-qualified transceivers. If you do choose to use other vendor transceivers, Avaya does not support them. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

  • Page 49: Sfp+ Labels

    SFP+ specifications SFP+ labels The typical Avaya SFP+ has a label on the top and bottom or side of the transceiver. The following figures show example labels. Avaya does use alternate labels, depending on the size of the device and space available for label information. Some devices do not have a CLEI code or label.

  • Page 50: Sfp+S

    – 2.1 dBm and dispersion penalty (TDP) Minimum optical modulation amplitude – 1.7 dBm Minimum extinction ratio 3.0 dB Maximum optical return loss tolerance – 21 dB Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 51 Average launched power – 0.2 dBm to 4 dBm Extinction ratio (minimum) 8.2 dB Tx power, OMA (minimum) + 1.5 dBm Tx power, OMA-TDP (minimum) – 0.2 dBm August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 52 10GBASE-LR 10.3125 Gb/s ± 100 ppm (10 GbE) Average receive power for BER 10 – 14.4 dBm to 0.5 dBm Receiver damage threshold 1.5 dBm Maximum receiver sensitivity in OMA – 12.6 dBm Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 53 Minimum extinction ratio 3.5 dB Optical return loss tolerance (minimum) – 20 dB Receiver characteristics Receiver damage threshold 1.5 dBm Receiver reflectance (maximum) – 12 dB August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 54 Optical launch for OM2 and 50 μm • 30% within 5 μm radius Uses 50 μm mode-conditioning 400/400 fiber patch cord • 81% within 11 μm radius Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 55 Transmitter characteristics Root-mean-square spectral width 0.05 to 0.40 nm Launch power – 7.3 to – 1.0 deciBels referenced to 1 milliwatt (dBm) Minimum extinction ratio 3.0 dB August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 56 The stressed sensitivity values are for system level BER measurements, which include the effects of clock and data recovery (CDR) circuits. Avaya recommends that you allocate at least 0.4 dB additional margin if you make component level measurements without the effect of CDR circuits.
  • Page 57 1 nm RIN OMA – 128 dB/Hz Extinction ratio (minimum) 8.2 dB Tx output: Units P_avg – 1 OMA + 0.7 — OMA-TDP – 2.3 — August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 58 Receiver damage threshold + 5 dBm, P_avg * Achievable link distance is primarily dependent on cable plant insertion loss. 70 km is not possible in some situations. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

  • Page 59: Chapter 7: Qsfp+ Transceivers

    QSFP+ transceivers are similar to XFP transceivers in physical appearance, but larger than SFP+ transceivers. QSFP+ transceivers provide Ethernet at 40 gigabit per second (Gb/s). Important: The VSP 7000 Series supports only Avaya-qualified QSFP+ transceivers. Other vendor QSFP+ transceivers will not work and Avaya does not support them. Warning: Risk of equipment damage Do not apply vertical pressure when you insert and remove the transceiver.

  • Page 60: Installing A Qsfp+ Transceiver

    Gigabit Ethernet ports to link with other 40 Gb Ethernet ports, or multiple 10 Gb Ethernet ports. Avaya QSFP+ transceivers use LC Duplex or MPO/MTP connectors to provide precision keying and low interface losses. The following table lists and describes the Avaya QSFP+ models. For more information about these QSFP+ transceivers, see QSFP plus specifications on page 63.
  • Page 61 Apply a light pressure to the QSFP+ until the device clicks and locks into position in the port. Note: The arrow indicates that the transceiver module is only partially inserted and must be pushed all the way into the port. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...

  • Page 62: Removing A Qsfp+ Transceiver

    Depending on the transceiver manufacturer, QSFP+ transceivers use bail-latch or pull-tab types of locking and extractor mechanisms. The following figure shows the pull-tab release mechanism used on Avaya QSFP+ transceivers. Other release mechanisms do exist. In the following figure, the bore plug remains in the QSFP+.

  • Page 63: Qsfp+ Transceiver Specifications

    Avaya does not support them. QSFP+ transceiver labels A label can be located on either the top, or bottom of the typical Avaya QSFP+ transceiver. The following figure shows an example label. Avaya does use alternate labels, depending on the size of the device and space available for label information.

  • Page 64: General Qsfp+ Transceiver Specifications

    –40 °F (–4 °C) to 185 °F (85 °C) Operating temperature 23 °F (−5 °C) to 158 °F (70 °C) QSFP+ transceivers The following sections provide specifications for supported QSFP+ transceivers. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...
  • Page 65 Maximum average optical power of OFF transmitter, –30 dBm each lane Minimum extinction ratio at 10.3125 Gbps 3.5 dB OMA (maximum) –128 dB/Hz Maximum optical return loss tolerance 20 dB August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 66 The 40GBASE-SR4/4x10GBASE-SR transceiver provides a high-speed link at an aggregate signaling rate. Important: Not all Avaya networking products support the 4x10GBASE-SR mode of operation. The following table lists the specifications for the 40GBASE-SR4/4x10GBASE-SR transceiver. The part number of this QSFP+ transceiver is AA1404005-E6.
  • Page 67 The following table identifies the part numbers for specific cable assembly lengths. Cable length Part number 1 meter (Passive) AA1404029-E6 3 meter (Passive) AA1404031-E6 5 meter (Passive) AA1404032-E6 Important: Not all Avaya products support all cable lengths. August 2014 Installing Transceivers and Optical Components on Avaya VSP 7000 Series Comments? infodev@avaya.com...
  • Page 68 QSFP+ transceivers Important: VSP 7000 Series switches do not currently support the 33 foot (10 meter) QSFP+ to QSFP+ 40 Gigabit DAC cable assembly. Installing Transceivers and Optical Components on Avaya VSP 7000 Series August 2014 Comments? infodev@avaya.com...

Table of Contents