Verifying Fa Message Authentication Status; Verifying Fa Per-Port Settings; Verifying Discovered Fa Elements - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

Troubleshooting Fabric Attach

Verifying FA message authentication status

Use this procedure to verify whether both FA Proxy and FA Server have the same authentication
settings (enabled on both, or disabled on both).
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Use the show fa message-authentication command to check message
authentication status.
3. If message authentication settings are different on FA Proxy and FA Server, use the [no]
[default] fa message-authentication command to change message
authentication settings.
Related Links
Troubleshooting Fabric Attach

Verifying FA per-port settings

Use this procedure to check FA per-port settings that may prohibit message exchange.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Use the show fa port-enable command to check FA per-port settings.
3. If FA per-port settings prohibit message exchange, use the fa port-enable command to
enable FA on required ports.
4. You can repeat step 2 to confirm settings.
Related Links
Troubleshooting Fabric Attach

Verifying discovered FA elements

Use this procedure to check the discovered FA elements.
Troubleshooting Avaya VSP 7000 Series
102
on page 101
on page 101
Comments on this document? infodev@avaya.com
July 2015